|
 MSPP |
|
STM-1/4 (OC-3/12) |
|
|
|
|
|
|
STM-4/16 (OC-12/48) |
|
|
|
STM-16/64(OC-48/192) |
|
|
|
|
Carrier Ethernet over NG-SDH/SONET |
|
|
|
|
|
|
|
|
|
|
DWDM |
|
|
|
|
|
Management Software |
|
|
|
|
TJ100MC-16S
|
|
Technical Specifications |
Network Topology
- Linear, Ring
Network Element Configurations
- Add-Drop Multiplexer (ADM)
- Terminal Multiplexer (TMUX)
- Regenerator
Optical Interfaces
- STM-16: S16.1, L16.1, L16.2, DWDM
- STM-4: S4.1, L4.1, L4.2
- STM-1: S1.1, L1.1, L1.2
- STM-1e
Electrical Interfaces
- PDH Interfaces: E1, E3/DS3
- Data Interfaces: 10/100/1000 Ethernet Interfaces (both transport and switching)
Cross-connect
- 80 x 80 STM-1 or 128 x 128 STM-1 equivalent
- Fully non-blocking at VC-12, VC-3 and VC-4 granularity
- Line-to-Line, Line-to-Tributary, Tributary-to-Line, Tributary-to-Tributary
Power Supply
- -48V DC nominal, -36 V to –60 V
- Power consumption – less than 300 W
Physical Dimensions
- (H x W x D): 354 x 482 x 300 mm
- Can be mounted on a 19” or 23”
or 600 mm rack
Network Protection
- SNCP, 1+1 MSP
- MS-SPRing
- LCAS Protection for Ethernet
- RSTP Protection with Ethernet switching
Operations Interface
- TejEMS (Tejas Networks Element Management Software) supports full FCAPS functionality via web browser interface
- SNMP interface for NMS
- RS-232 port for craft interface
- V.24/V.28 modem interface for remote management
- In-band control (IBC) supported using SDH Overhead
- 10/100 Base-Tx (RJ-45) management interface
- External alarm interface and indicators
Maintenance
- Higher-order and Lower-order POH, SDH level alarms
- Performance monitoring as per ITU-T Rec. G.826 and G.784
- Local and remote loop-back
- Remote software download
Optional Hardware Redundancy
- Power Supply redundancy
- Cross Connect, Timing and Control System Redundancy
Timing & Synchronization
- Timing & Synchronization of System as per ITU-T Rec. G.813
- Internal oscillator capable of supplying a G.813 compliant Stratum–3 SEC
- Support of SSM byte
- Internal & External Timing interfaces: Two E1 BITS interfaces (as per ITU-T G.703)
- Accepts/provides 2 Mbps/2 Mhz clock references
Order Wire Support, Alarms and User Data Channel
- E1/E2 bytes for Express Orderwire
- F1 byte for user data channel
- Five potential-free outputs and five potential-free inputs
Environmental
- Operating Temperature: -5ºC to 50ºC
- Relative Humidity: 10% to 90%, non condensing
|
Last Updated Dec-2007 |
|
