|
 MSPP |
|
STM-1/4 (OC-3/12) |
|
|
|
|
|
|
STM-4/16 (OC-12/48) |
|
|
|
STM-16/64(OC-48/192) |
|
|
|
|
Carrier Ethernet over NG-SDH/SONET |
|
|
|
|
|
|
|
|
|
|
DWDM |
|
|
|
|
|
Management Software |
|
|
|
|
TJ100CPE
|
|
Technical Specifications |
Network Topology
- Linear, Ring
Network Element Configurations
- Add-Drop Multiplexer (ADM)
- Terminal Multiplexer (TMUX)
Aggregate Interfaces
- 2 x STM-1 o/e
- S1.1, L 1.1, L 1.2 (ITU-T G.957 compliant)
Tributary Interfaces
- E1/DS1, E3/DS3
- STM-1o/e
Ethernet Interfaces
- 8-port 10/100 Ethernet
- LCAS
- GFP
- Lower and Higher Order Virtual Concatenation
- Full/half duplex, auto-negotiation
Cross-Connect
- 252x252 VC-12
- Fully non-blocking
- Line-to-Line, Line-to-Tributary, Tributary-to-Line, Tributary-to-Tributary
Network Management
- Element Management System: TejNES supports full FCAPS functionality
- RJ-45 port for craft interface
- In-band control support using SDH/SONET Overhead Bytes
- E1 management channel with drop facility
- Alarm signaling indicators and External Contacts
Maintenance
- Higher-order and Lower-order POH, SDH level alarms and performance monitoring (as per ITU-T G.826 and G.784)
- Software Downloads
Timing & Synchronization
- Timing & Synchronization of System as per ITU-T Rec. G.813
- Internal oscillator capable of supplying a G.813 compliant Stratum –3 SEC
- Support of SSM byte
- Internal & External Timing interfaces: Two E1 BITS interfaces (as per ITU-T G.703)
Alarms and User Data Channel
- F1 byte for user data channel
- Four potential-free outputs and seven potential-free inputs
Physical Dimensions
- Dimensions (H x W x D): 44 mm x 445 mm x 432 mm
Environmental
- Operating Temperature: 0ºC to 50ºC
- Relative Humidity: 10% to 90%, non condensing
- ROHS Compliant
Power Supply
- 48 V DC nominal, -36 V to –60 V or 230 V 50 Hz AC Power Supply
- Power consumption less than 35 W
- Redundant Power Supply
|
Last Updated Dec-2007 |
|
